BLUETOOTH DOWNLIGHT

A high quality flush mounted, diffused, LED downlight with aluminium body. When connected to Bluetooth, this downlight can perform on/off, dimming, colour tuning, scheduling, group / scene control and remote access from a smart phone or tablet. The downlight can also be connected to a standard momentary (bell press) switch to allow on/off and dimming control from a wall switch as well as a smart phone or tablet - no dimmer required!

OVERVIEW
Hours (Avg) 35000
IK Rating 09
Warranty 3
Watts 9
Voltage 240
Lumen Output 800
CRI 80
Cutout 90
Colour White
Beam Angle 100
  • Bluetooth enabled driver
  • Colour Tunable between 2700k and 6500k from a smart phone or tablet
  • On/Off/Diming from both standard momentary wall switch and a smart phone or tablet
  • Scheduling/Grouping/Scenes from a smart phone or tablet
  • Compatible with Diginet Sitara Lighting Control System
  • 90mm cut-out
  • Low profile (52mm) downlight head
  • IP65 (from below)

Technical Specification

Hours (Avg) IK Rating Warranty Watts Voltage Lumen Output CRI Cutout Colour Beam Angle
35000 09 3 9 240 800 80 90 White 100
Add Type#, Qty, Notes to Datasheet
Select Item Code Description Type# Quantity Product Notes
DLP5BT/W BLUETOOTH LED DOWNLIGHT 9W DIM
Add to
SpecSelection
Item CodeDescription
DLP5BT/WBLUETOOTH LED DOWNLIGHT 9W DIM
Beam Distribution Circuit Wattage Dimmable Dimming Technology Chip Configuration Dimming Range - Max Lamp Type Line Voltage Frequency Mounting Arrangement Nominal Line Voltage - Max Nominal Line Voltage - Min Operating Temperature Multimate Compatible Includes Neutral & Earth Termination OS Compatibility
Symmetric 9 yes Push to Dim PCBA 100 LED (PCBA) 50Hz Ceiling 240 220 0 to 40
40
0
No Yes iOS & Android
All images shown on this website are for illustration purpose only. Actual product may vary due to product enhancement or colour variation.

Gerard Lighting products are recommended to be installed and maintained in accordance with the relevant Gerard Lighting installation instructions. Gerard Lighting recommends all its products to be installed by a qualified and licenced electrical contractor, in accordance with AS/NZS3000. In the circumstance where a customer is in doubt or not able to access the relevant Gerard Lighting installation instructions; it is recommended to consult with a Gerard Lighting specialist by calling on 1300 799 300. For any further information, please refer to the Terms and Conditions and Warranty document.

Have a question about this product?

MAKE AN ENQUIRY

or call us on 1300 799 300

Similar Products