Litelux Colour Select LED Downlight GEN2

Litelux Colour Select Downlight offers freedom of choice for installer to select required colour temperature for different areas, all from the same luminaire.

OVERVIEW
Warranty 3
Voltage 240
Weight 0.25
CRI 80
Colour White
Beam Angle 100
Dimmable yes
Finish Matt White
Lamp Type LED (PCBA)
Heat Sink Material Aluminium (Die Cast)
  • Select Colour temperature from 3000K/4000K/6500K with switch located on the back
  • Superior thermal performance, leading to a longer life
  • IC-4 compliant which permits use when covered
  • White thermoplastic body for better heat dissipation
  • IP44 from below to protect against insects and water splashes
  • Low power consumption with lumen output of up to 105lm/W
  • Approved dimmers - we recommend Diginet range of Dimmers
  • Up to 36,000 hours L70, LLMF*

Technical Specification

Warranty Voltage Weight CRI Colour Beam Angle Dimmable Finish Lamp Type Heat Sink Material
3 240 0.25 80 White 100 yes Matt White LED (PCBA) Aluminium (Die Cast)

Filter Products

Wattage
Lumen Output
Height
Less filters
Add Type#, Qty, Notes to Datasheet
Select Item Code Description Type# Quantity Product Notes
DLP63/4/65FWG2 LITELUX COLOUR SELECT D/LIGHT GEN2 7W FLUSH LEN
DLP63/4/65RWG2 LITELUX COLOUR SELECT D/LIGHT GEN2 6.5W RECESSED LENS
Add to
SpecSelection
Item CodeDescription
DLP63/4/65FWG2LITELUX COLOUR SELECT D/LIGHT GEN2 7W FLUSH LEN
DLP63/4/65RWG2LITELUX COLOUR SELECT D/LIGHT GEN2 6.5W RECESSED LENS
Dimensions H x W x L (mm) Lumen Output Lamp Style Beam Distribution Circuit Wattage Dimming Technology Wattage Chip Configuration Operating Temperature
58
58
750 LED Symmetric 7 Phase 7 PCB 0 to 40
40
0
66
66
730 LED Symmetric 6.5 Phase 6 PCB 0 to 40
40
0
All images shown on this website are for illustration purpose only. Actual product may vary due to product enhancement or colour variation.

Gerard Lighting products are recommended to be installed and maintained in accordance with the relevant Gerard Lighting installation instructions. Gerard Lighting recommends all its products to be installed by a qualified and licenced electrical contractor, in accordance with AS/NZS3000. In the circumstance where a customer is in doubt or not able to access the relevant Gerard Lighting installation instructions; it is recommended to consult with a Gerard Lighting specialist by calling on 1300 799 300. For any further information, please refer to the Terms and Conditions and Warranty document.

Have a question about this product?

MAKE AN ENQUIRY

or call us on 1300 799 300

Similar Products